Search found 5 matches

by skal1
Wed Nov 09, 2016 3:02 pm
Forum: Build
Topic: Pico se probelm
Replies: 3
Views: 9950

Re: Pico se probelm

ok , got the Rms and the Peak circuit working now , but the non linear capacitor (NLC) circuit is not working the green LEDs are not illuminating , when i connect RC to A on the pico se board.

any help would be much appreciated.

cheers

Den
by skal1
Tue Nov 08, 2016 2:14 pm
Forum: Build
Topic: Pico se probelm
Replies: 3
Views: 9950

Re: Pico se probelm

ok cheers. so i fire it up and their was no smoke , good sign. so all pots are connected and BAR LED'S connected to B+, meter lights up and stays on, when i attach a wire from the in of meter board to the out of main pico board, bar led's go out . should this happen , when gain,threshold and ratio a...
by skal1
Mon Nov 07, 2016 7:12 pm
Forum: Build
Topic: Pico se probelm
Replies: 3
Views: 9950

Pico se probelm

Ok , i finally got around to build this project and i have run into a few problems, the first issue, is that the green led's don't light up, on power on , their is no signal or mode switch connected

cheers

skal
by skal1
Sun Sep 01, 2013 5:21 pm
Forum: Build
Topic: pico stepped controls
Replies: 1
Views: 11451

pico stepped controls

ok, so i am dipping my toe's into mastering, and i was wondering if i could convert my variable pot pico to a stepped affair. i know roger has got these on the road already so i it is doable . First questions are what are the range;s of the ratio ,makeup,threshold , attack and release pots. what mat...
by skal1
Fri Jan 13, 2012 10:44 am
Forum: Build
Topic: 20 led gr meter
Replies: 0
Views: 15089

20 led gr meter

ok , i have now got the funds to build my pico se, so i am going to start with the meter pcb . I have a couple of ? what valve can i replace R3{1k69} with and can i replace the lite on 1000e bargraph with leds or will this reduce the resolution of the meter circuit. Testing the pcb. can i inject a s...