Search found 5474 matches

by mediatechnology
Thu Feb 15, 2018 8:07 am
Forum: Pro Audio Design
Topic: The MTC-MS-II: An Improved Precision Mid Side Matrix
Replies: 18
Views: 25718

Re: The MTC-MS-II: An Improved Precision Mid Side Matrix

I measured the crosstalk performance for full encode-decode with various combinations of Mid Side Gain Offset. They virtually overlay at Mid/Side at 0dB/0dB, -6dB/0dB, 0dB/+6dB and -6dB/+6dB. (Numbers are those applied to encode. Decode has a reversed sign.) https://www.ka-electronics.com/images/jpg...
by mediatechnology
Wed Feb 14, 2018 8:17 pm
Forum: Pro Audio Design
Topic: The MTC-MS-II: An Improved Precision Mid Side Matrix
Replies: 18
Views: 25718

Re: The MTC-MS-II: An Improved Precision Mid Side Matrix

I got four boards in and the layout and design worked perfectly. I'll be running some more tests and post the FFTs. This particular board run seemed to have a slight registration problem which offset the default 0.012" clearance on some holes to the point one pad had a tin whisker short to the ...
by mediatechnology
Wed Feb 14, 2018 8:09 pm
Forum: The Peabody Lounge
Topic: Entropy
Replies: 1312
Views: 1167415

Re: Entropy

Nice tool holder Paul. Industrial strength Aluminum. I have a pile at one end of the bench in kitchen drawer organizer basket-thingys. The tool I need always seems to be on the bottom of the pile. JR: As to moths and other bugs I'm finding whole cloves and Dr Bronners Pure Peppermint Castille Soap h...
by mediatechnology
Sun Feb 11, 2018 4:46 am
Forum: Pro Audio Design
Topic: Strange simulation results
Replies: 9
Views: 14039

Re: Strange simulation results

Wouldn't you want to put it in front of the transformer (or along side it) in order to preserve the high impedance input?

Otherwise the transformer is going to load the instrument you're trying to DI.
by mediatechnology
Sat Feb 10, 2018 7:28 pm
Forum: Pro Audio Design
Topic: Tilt Equalizer
Replies: 35
Views: 68668

Re: Tilt Equalizer

I just noticed that the Ambler Tlit EQ, if redrawn, is a Wien bridge. One top arm is the 24K, the other top arm the 10K+10nF. Below the 10K+10nF top arm is the 24K bottom leg. Below the 24K top arm is the 10K+10 nF leg. The pot sits between the arms and legs of the bridge. The top point of the bridg...
by mediatechnology
Sat Feb 10, 2018 2:34 pm
Forum: Pro Audio Design
Topic: THAT1240 Gain Tricks
Replies: 7
Views: 11412

Re: THAT1240 Gain Tricks

I think I have one client that uses parallel with a 23K5 load.
by mediatechnology
Fri Feb 09, 2018 7:32 pm
Forum: Pro Audio Design
Topic: The MTC-MS-II: An Improved Precision Mid Side Matrix
Replies: 18
Views: 25718

Re: The MTC-MS-II: An Improved Precision Mid Side Matrix

Thanks Jeffrey. I wasn't planning on upgrading the original MS but after running some experiments and listening to the result I felt that I had to. Getting 10 pounds of relays on a 5 pound PC board was the challenge. This is a plot I did to demonstrate the effect of the Tilt EQ on Width. One input c...
by mediatechnology
Fri Feb 09, 2018 6:28 pm
Forum: Pro Audio Design
Topic: THAT1240 Gain Tricks
Replies: 7
Views: 11412

Re: THAT1240 Gain Tricks

Thanks for joining us Bill.

Mono being lateral modulation? Early LPs?

My instincts tell me series strap.
by mediatechnology
Thu Feb 08, 2018 1:57 pm
Forum: Pro Audio Design
Topic: The MTC-MS-II: An Improved Precision Mid Side Matrix
Replies: 18
Views: 25718

Re: The MTC-MS-II: An Improved Precision Mid Side Matrix

Boards on order! Should know if they work by next week. If they do I'll have 3 extra.

Image
The MTC-MS-II Precision Mid SIde Matrix Encoder/Decoder with Width and Side Tilt EQ.