Entropy

Relax in southern comfort on the east bank of the Mississippi. You're just around the corner from Beale Street and Sun Records. Watch the ducks, throw back a few and tell us what's on your mind.
User avatar
JR.
Posts: 3329
Joined: Sat May 24, 2008 7:21 pm
Contact:

Re: Entropy

Post by JR. » Thu Jun 18, 2020 1:42 pm

Replaced the handle so now back in full "safe to use" service.

While I had it apart I repaired another feature that stopped working some time ago... The spark kill when choked full up stopped working around a year ago. I found a loose wire that when snapped back in place, kills the spark with choke lever position.

Now better than before it broke and like new. 8-)

JR
Don't only half-ass tune your drums. Visit https://circularscience.com to hear what properly "cleared" drums sound like.

User avatar
JR.
Posts: 3329
Joined: Sat May 24, 2008 7:21 pm
Contact:

Re: Entropy

Post by JR. » Tue Jun 23, 2020 10:49 am

I started to write this up for the too cheap to fix thread...
======
Not sure whether this should be in entropy thread, but lately my mouse left button has become balky, intermittent. For a while I have been suspicious of operating system conflicts, but a different mouse works perfectly.

Man I am cheaper than I thought.... the going price these days for a mouse is $7-$8 from all the obvious suspects. I was thinking more like $3

======

OK found the exact tact switch (I think) for $0.40 from digikey. Image

I expect shipping cost will exceed parts cost...

I was tempted to swap left and right button switches, but nah....

[edit- I remember thinking I was getting old when I ran my first BIC ball point pen out of ink.. Now I wore out a mouse button... :lol: /edit]

JR
Don't only half-ass tune your drums. Visit https://circularscience.com to hear what properly "cleared" drums sound like.

User avatar
JR.
Posts: 3329
Joined: Sat May 24, 2008 7:21 pm
Contact:

Re: Entropy

Post by JR. » Wed Jun 24, 2020 12:48 pm

I am working on a new experiment to make a beer bottle washer that is both robust and doesn't spray water when you first open the water faucet (it uses water pressure to close the spray valve.)

The nice valve seems to only last about one year (the spring that closes it fatigues). The old crude washer works forever (decades already) but sprays water.

I just purchased a 3/4" check valve... My plan is to connect this between sprayer and faucet. If this maintains water pressure even when faucet it turned off, it shouldn't spray water when turned on again.

Relatively cheap check valve, but then I had to add adapters to convert between NPT and GH threads. Note this is a real check valve, not the cheap garden hose vacuum break check valves that just let the hose water drain out, but not back into the water system.

This is probably more expensive than it is worth... I could just replace with new every year or so...

JR

Image
Don't only half-ass tune your drums. Visit https://circularscience.com to hear what properly "cleared" drums sound like.

User avatar
JR.
Posts: 3329
Joined: Sat May 24, 2008 7:21 pm
Contact:

Re: Entropy

Post by JR. » Fri Jun 26, 2020 10:00 am

replacement tact switches arrived this morning and mouse is already fixed.... 8-)

===

I finally heard back from the beer bottle washer company with the puny springs... he asked for my address, so we'll see if they ever fixed that design. :oops:

JR
Don't only half-ass tune your drums. Visit https://circularscience.com to hear what properly "cleared" drums sound like.

User avatar
JR.
Posts: 3329
Joined: Sat May 24, 2008 7:21 pm
Contact:

Re: Entropy

Post by JR. » Wed Jul 01, 2020 4:51 pm

I just re-strung my branch cutter with a stronger cord... The previous replacement cord was too small (puny).

JR
Don't only half-ass tune your drums. Visit https://circularscience.com to hear what properly "cleared" drums sound like.

AnalogJoe
Posts: 13
Joined: Mon Dec 24, 2018 4:11 pm

Re: Entropy

Post by AnalogJoe » Wed Jul 01, 2020 7:51 pm

JR. wrote:
Fri Jun 26, 2020 10:00 am
replacement tact switches arrived this morning and mouse is already fixed.... 8-)

How much did you end up paying including shipping?

User avatar
JR.
Posts: 3329
Joined: Sat May 24, 2008 7:21 pm
Contact:

Re: Entropy

Post by JR. » Wed Jul 01, 2020 10:17 pm

I bought some other items at same time (like batteries to make more drum tuners, @4 ea.) so not fair comparison.

IIRC the tact switches were around $0.40 ea... I bought 5 so I have spares for next time. :lol:

Shipped first class mail USPS so only a few $...

JR

PS; Mouse works fine
Don't only half-ass tune your drums. Visit https://circularscience.com to hear what properly "cleared" drums sound like.

Post Reply