Page 2 of 2

Re: AudioTester is Back!

Posted: Tue Jun 11, 2019 8:02 am
by lsburden
That's not good.

Re: AudioTester is Back!

Posted: Tue Jun 11, 2019 9:44 am
by mediatechnology
IIRC there is an architectural limitation because the QA400 USB transmits in burst rather than a stream which a conventional USB sound card would use.
Not sure about the QA401 which improved the I/O.

I think you're still better off finding a good sound card, USB or AES/SPDIF audio interface.
Then you can use a large number of packages such as AudioTester, YMEC, VisualAnalyzer, ARTA etc.

Re: AudioTester is Back!

Posted: Tue Jun 11, 2019 2:33 pm
by lsburden
I stumbled across a 7 part article on audioxpress.com...
https://www.audioxpress.com/article/pra ... asurements
https://www.audioxpress.com/article/pra ... nts-part-2
https://www.audioxpress.com/article/pra ... nts-part-3
https://www.audioxpress.com/article/pra ... nts-part-4
https://www.audioxpress.com/article/pra ... 5-the-user
https://www.audioxpress.com/article/pra ... t-examples
https://www.audioxpress.com/article/pra ... sound-card

It's a few years old but still some good info.
I really need an audio/distortion analyzer. I spent some time really looking at the Cordell THD Analyzer but a sound card or interface and audiotester could be a lot cheaper.
My other obstacle is that I have a laptop - not a PC. So that means an external interface. The Focusrite Scarlett 2i2 is an option.

Re: AudioTester is Back!

Posted: Wed Jun 12, 2019 10:59 am
by lsburden
The ADC and DAC are not the difficult part. AES/SPDIF is easy.
USB interface not so easy...

Re: AudioTester is Back!

Posted: Wed Jun 12, 2019 11:08 am
by lsburden