Denon DL-103 Mechanical Impedance/Compliance Specifications

A resource for technical documentation. Datasheets, application notes, instruction manuals, books and links to resources are found in the Document Library.
Post Reply
User avatar
mediatechnology
Posts: 4672
Joined: Sat Aug 11, 2007 2:34 pm
Location: Oak Cliff, Texas
Contact:

Denon DL-103 Mechanical Impedance/Compliance Specifications

Post by mediatechnology » Tue Apr 30, 2019 7:37 pm

There doesn't seem to be much on the web regarding the mechanical impedance of the DL-103 at low frequencies.

Denon provides this chart in the instruction booklet:

Image
Denon DL-103 Mechanical Electrical Impedance Level Crosstalk

Image
https://ka-electronics.com

“Diet, injections, and injunctions will combine, from a very early age, to produce the sort of character and the sort of beliefs that the authorities consider desirable, and any serious criticism of the powers that be will become psychologically impossible.” – The Impact of Science on Society (1953) by Bertrand Russell, p.50

Dr. Sherri Tenpenny Exposes 10 Deadly Dangers of Pzifer/Johnson & Johnson Covid-19 Vaccines: "This is a well-designed killing tool." https://waynekirkwood.com/content/Docto ... accine.mp4
Plandemic Series: "Pland3mic - Indoctornation" https://waynekirkwood.com/content/Pland ... nation.mp4
Plandemic Series: "Plandemic - Doctors In Black" https://waynekirkwood.com/content/Plandemic.mp4

billshurv
Posts: 436
Joined: Thu Feb 01, 2018 7:07 am

Re: Denon DL-103 Mechanical Impedance/Compliance Specifications

Post by billshurv » Wed May 01, 2019 2:53 am

Nope, Japanese don't publish that. There are 3 types of compliance just to confuse everyone

Static: Force required to move the cantilever, fairly pointless
Dynamic (10Hz): This is the one you want to calculate where your resonance will be. Preferable to have vertical and horizontal stated seperately
dynamic (100Hz): This is a measure of the VTF required to track a specific band on a test record.

There is no direct relationship between them.

Best thing to do is play a silent groove, pass through the M-S converter and FFT. Then you can see the LF resonances and work back.

Post Reply