Texar Prism clone prototype Finished Version

Where we discuss new analog design ideas for Pro Audio and modern spins on vintage ones.
flyboy71
Posts: 57
Joined: Thu Nov 21, 2019 7:56 am

Re: Texar Prism clone prototype Finished Version

Post by flyboy71 » Sun Oct 10, 2021 1:48 pm

Combined all build guides into one user and construction manual.
Attachments
TPC100 Manual Rev A.pdf
(2.38 MiB) Downloaded 84 times
Home of the Texar Prism Clone: www.ortelligent.com

"Things are more like they are now then they ever were before" - Dwight

User avatar
mediatechnology
Posts: 5039
Joined: Sat Aug 11, 2007 2:34 pm
Location: Oak Cliff, Texas
Contact:

Re: Texar Prism clone prototype Finished Version

Post by mediatechnology » Thu Oct 14, 2021 1:42 pm

I received my boards and am looking forward to getting started building them!

The quality of the boards and documentation is excellent.
The SMT parts are pre-soldered.

There are 2 BP1 boards:

Image
Ortelligent BP1 Board

A single MB1 I/O board is required:

Image
Ortelligent MB1 Board

4 DS1 boards are required which are supplied on 2 panels. This is one panel containing 4 display drivers.
Jeff supplied an LED alignment jig which will make building the DS1 super-easy.

Image
Ortelligent DS1 Board

I also received a box of pre-programmed processors.
There are 9 total.
https://ka-electronics.com

Apple-flavored Ivermectin is delicious.

ajanis
Posts: 5
Joined: Wed Sep 08, 2021 3:59 pm

Re: Texar Prism clone prototype Finished Version

Post by ajanis » Fri Oct 29, 2021 10:39 am

I got mine a few weeks ago. Finalized the BOM’s with suppliers yesterday (been a busy few weeks).

Everything should be here next week - very excited over here!

The documents are nicely written and the boards are very well thought out.

Did I mention that I am excited!

ajanis
Posts: 5
Joined: Wed Sep 08, 2021 3:59 pm

Re: Texar Prism clone prototype Finished Version

Post by ajanis » Fri Nov 12, 2021 11:03 pm

It works!
Attachments
4BFB186F-10FC-4451-9EE7-FCD13F5657DB.jpeg

User avatar
mediatechnology
Posts: 5039
Joined: Sat Aug 11, 2007 2:34 pm
Location: Oak Cliff, Texas
Contact:

Re: Texar Prism clone prototype Finished Version

Post by mediatechnology » Tue Nov 16, 2021 5:41 am

Congratulations!
I need to get crackin' on mine - I have a backlog of boards to build.
Have you run audio through it yet?
https://ka-electronics.com

Apple-flavored Ivermectin is delicious.

ajanis
Posts: 5
Joined: Wed Sep 08, 2021 3:59 pm

Re: Texar Prism clone prototype Finished Version

Post by ajanis » Sat Nov 27, 2021 12:29 pm

Ortelligent Clone with a Gentner Prism II.

Audio in the video is from the Gentner - didn't think to switch it before I recorded (maybe next time).

I had to re-work the front panel file that was supplied - as the printer at FPE was down for repairs. I had to regenerate all of the "drawings" to be engravings, and redo all of the text. Unfortunately both the fonts for the logo and the original text were not compatible. So the logo didn't make it on the panel (sorry flyboy71) for this one.

https://www.youtube.com/watch?v=K4fUbIOuCeo

flyboy71
Posts: 57
Joined: Thu Nov 21, 2019 7:56 am

Re: Texar Prism clone prototype Finished Version

Post by flyboy71 » Thu Dec 30, 2021 11:30 am

So I have made a one time buy on the parts needed for the remaining board sets. I have 4 sets left with 2 in reserve for potential buyers. I was surprised at the hoops needed to jump through get the parts but I want to be able to deliver what I have left. I will order more bare boards when the parts issue improves and I deplete what I have now.
Home of the Texar Prism Clone: www.ortelligent.com

"Things are more like they are now then they ever were before" - Dwight

User avatar
mediatechnology
Posts: 5039
Joined: Sat Aug 11, 2007 2:34 pm
Location: Oak Cliff, Texas
Contact:

Re: Texar Prism clone prototype Finished Version

Post by mediatechnology » Thu Dec 30, 2021 1:05 pm

Are there any issues sourcing the MLCC caps?
I have an open cart at Mouser right now for another project and haven't checked them.
https://ka-electronics.com

Apple-flavored Ivermectin is delicious.

flyboy71
Posts: 57
Joined: Thu Nov 21, 2019 7:56 am

Re: Texar Prism clone prototype Finished Version

Post by flyboy71 » Thu Dec 30, 2021 6:13 pm

I had trouble sourcing the SMD caps I use on the display boards. There was only one recommended replacement to choose from. I'm not sure about any thru hole parts. That's another reason I stopped short of supplying assembled boards until this clears up a bit. The other part I see dwindling fast are the micros used on the main board so I did a bulk order on those. I have been using three vendors to get anything anymore.
Home of the Texar Prism Clone: www.ortelligent.com

"Things are more like they are now then they ever were before" - Dwight

flyboy71
Posts: 57
Joined: Thu Nov 21, 2019 7:56 am

Re: Texar Prism clone prototype Finished Version

Post by flyboy71 » Fri Dec 31, 2021 10:30 am

Whew! Im glad I ordered when I did. On Monday there were 1400 in stock. I ordered 20 to have plenty and now look at it. I have watched this go from 9000 to 7000 to 3000 from the first time I offered my project. I think since the SMD version has been unobtainable since beginning of the year this has been redesigned into products. Digikey had some stock but its gone now also. Lead time on Mouser is out till 2023.
Attachments
PIC.JPG
Home of the Texar Prism Clone: www.ortelligent.com

"Things are more like they are now then they ever were before" - Dwight

Post Reply